Conveyance

• Idle speed 2700 rpm
• Stall torque 1 Nm
• Rated torque 0.2 Nm
• Rated speed 2000 rpm

• Idle speed 5168 rpm
• Stall torque 1.1 Nm
• Rated torque 0.1 Nm
• Rated speed 4600 rpm

• Idle speed 790 rpm
• Stall torque 1.8 Nm
• Rated torque 0.5 Nm
• Rated speed 600 rpm

• Idle speed 2680 rpm
• Stall torque 2 Nm
• Rated torque 0.27 Nm
• Rated speed 2375 rpm

• Idle speed 2225 rpm
• Stall torque 2.5 Nm
• Rated torque 0.48 Nm
• Rated speed 1785 rpm

• Idle speed 655 rpm
• Stall torque 6.7 Nm
• Rated torque 1.3 Nm
• Rated spee  507 rpm

• Idle speed 1300 rpm
• Stall torque 7 Nm
• Rated torque 1.3 Nm
• Rated speed 1100 rpm

• With feather key groove
• 7 reduction ratios from 1:1 to 47:1
  
• Axis distance 15 mm

• With feather key groove
• 9 reduction ratios from 1:1 to 65:1
  
• Axis distance 20 mm

• With feather key groove
• 9 reduction ratios from 1:1 to 64:1
  
• Axis distance 30 mm

• With splined shaft connection
• 8 reduction ratios from 5:1 to 65:1
  
• Axis distance 20 mm

• Axis distance 20 mm
• Backlash < 0.5 mm
• Max. speed 100 mm/s

• Axis distance 20 mm
• Backlash < 0.5 mm
• Max. speed 100 mm/s

• With turntable 
• 9 reduction ratios from 1:1 to 65:1
  
• Axis distance 20 mm
• With one drive pin or with trough-screw

• With turntable
• Backlash: < 0.05° (3‘) to MDrive = 0.1 Nm / < 0.5° (30‘) to MDrive = 1 Nm
• With one drive pin or with through going axis

• With feather key groove
• Backlash: < 0.05° (3‘) to MDrive = 0.1 Nm / < 0.5° (30‘) to MDrive = 1 Nm
• Maintenance-free grease lubrication

2x solid shaft

• 10 sizes
• Backlash at drive shaft 3° ± 1°
  
• Ratio 1:1

1x solid shaft, 1x blind hollow shaft

• 4 sizes
• Backlash at drive shaft 3° ± 1°
  
• Ratio 1:1

3x shaft in synchronization/counter-rotation

• 10 sizes
• Ratio 1:1
• Backlash at drive shaft 3° ± 1°
  

1x blind hollow shaft and solid shaft in synchronization

• 4 sizes
• Ratio 1:1
• Backlash at drive shaft 3° ± 1°
  

1x solid shaft, 2x blind hollow shaft in counter rotation

• 4 sizes
• Ratio 1:1
• Backlash at drive shaft 3° ± 1°
  

• Ratio 1:1
• Drive torque 10 Nm
• Housing die-cast zinc

• Max. load pull/push 800 N
• Ratio 1,44:1, 1,5:1
• Type of spindle Tr12x3

• 4 Variants, i 1:1 - 30:1
• Max. drive torque 2 - 17 Nm
• Outer dimensions 70x40x40 mm

• Customer-specific
• Various manual switches
• Appropriate cables

• RPM up to 1.300
• Torque up to 10 Nm
• Peak torque up to 13 Nm

• No gearbox – no wear
  
• Rated speed 530 rpm
• Achievable max. speed up to 31 km/h

• No gearbox – no wear
  
• Rated speed 316 rpm
• Achievable max. speed up to 14 km/h

• No gearbox – no wear
  
• Rated speed 154 rpm
• Achievable max. speed up to 7 km/h

• Our ultra-compact gearless i-Wheel C 3213 direct drive with a fully integrated Synapticon Circulo 9 safety controller in use

• Gearless BLDC wheel hub drives
• Very smooth running
• Maintenance-free