Motor drive 3112

Description

Compact 12 V DC motor with worm gear and through going hexagon
socket. A cable with AMP plug and an integrated Hall sensor allows easy and secure control of the entire system. Easily adaptable via hexagon socket and anchor points.

Special features

  • Two integrated Hall sensors for measurement of the revolutions and direction of rotation
  • Through going hexagon socket in wrench widths 6 mm and 9 mm
  • Good self-locking properties
  • 100 mm motor cable with connector included
Variant key

Variants are formed by diff erent wrench widths.

Technical notes

  • The drive requires a suitable 12 V controller.
  • The drive working range (nominal torque) is determined for a service life of 10,000 double strokes.
  • By using a controller with a short-circuit brake the holding torque position of the drive can be increased.
 Model 3112.00-1009 3112.00-1006
Motor DC Motor 12 V DC Motor 12 V
Sensor/Power supply Hall/5 V DC/0.3 A Hall/5 V DC/0.3 A
Protection class IP30 IP30
Idle running speed 120 rpm (12 V) 120 rpm (12 V)
Duty cycle idle speed 20% (at 5 min.) 20% (at 5 min.)
Duty cycle nominal load* 20 s ON 240 s OFF 20 s ON 240 s OFF
Rated torque* 2.8 Nm 2.8 Nm
Short term peak torque (<1s) 6 Nm 6 Nm
Input hex 9 mm hex 6 mm

* Load determined for service life of 10,000 double strokes

with 3130.14-V1XEXXXHXXX with 3130.14-V2XEXXXHXXX
Type of spindle TR14x3 RH SG14x16P4 RH
Duty cycle nominal load* & Stroke 500 mm 90 s ON/ 540 s OFF 25 s ON/ 300 s OFF
Max. lifting force F1* 900 N 400 N
Max. pulling force F2* 500 N 400 N
Stat. self locking 150 kg 60 kg

* Load determined for service life of 10,000 double strokes