Drive with throughgoing spindel 3146


Direct current motor with worm gear and through-going not rotating spindle for push and pull movements.

Special features

  • Two integrated Hall sensors for detecting the rotations and the direction of rotation
  • With through-going spindle TR12x3 as standard
  • Other spindle types available on request
  • Spindle material, finishing and length of the spindle according to customer specifications

Technical notes

  • Depending on the the spindle pitch, the system could back-drive
  • Attention: The mounting flange are only plugged together on the motor housing. When installing them in the system, the mounting holes on the side should be used and screwed on with the screws supplied loose. If side mounting is not required, the mounting flange can simply be omitted
  • The drive can be installed both horizontally and vertically
MotorDC Motor 24 V
Sensor/Power supplyHall/5 V DC/0.3 A
Protection classIP30
Duty cycle20% (at 5 min.)
Idle running speed115 rpm (24 V) 120 rpm *
Type of spindleTr12x3 RH
Spindle lengthin standard 400 mm Customized lengths possible
Max. drive torque1200 N
Movement speed6 mm/s *

* in combination with LogicData control box Compact-3