Page 9 - Ketterer – Brochure Motor Drives and Spindle Drives

Variant A with mounting plate
73.5 Mounting screw 68.5
DIN EN ISO 10642 - M5
58.5
23.5 43.9
ø45
20.2
40 A Variant B without mounting plate
Pin assignment
View A
123
43.6
1. Motor black - 2. Motor blue +
Wire AWG18
PIN type AMP170364 or ALEX 7003T
or HRB T 1020BS-2
3. Hall sensor red +5V
4. Hall sensor violet, output 2 5. Hall sensor black -
6. Hall sensor green, output 1
Wire AWG 26
PIN type AMP170363
or ALEX 7003T
or HRB T 1020BS-2A
6 5
Technical notes
4
▪ The drive working range (nominal torque) is determined for a service life of 10,000 double strokes.
▪ Through the controller* the system is regulated such that the speed in the entire drive working range is kept as constant as possible.
▪ By using a controller with a short-circuit brake the holding torque position of the drive can be increased.
* In combination with LogicData control box Compact-3
www.ketterer.de
29
ø20
120° (3x)
hex 6.1
hex 6.1
24.6
24.8
145.9
Cable length 100= 10 incl. connector
13.6 11.4
Gear Motors
M5 (3x)