Page 8 - Ketterer – Brochure Motor Drives and Spindle Drives

Motor drive 3130
Technical data
Motor
Sensor/Power supply Protection class
Idle running speed
Duty cycle idle speed
Rated torque*
Duty cycle nominal load Short term peak torque (<1s) Input
DC Motor 24 V Hall/5 V DC/0.3 A IP30
120 rpm (24 V) 20% (at 5 min.) 3.5 Nm
20 s ON 240 s OFF 6 Nm
hex 6 mm
DC Motor 24 V Hall/5 V DC/0.3 A IP30
120 rpm (24 V) 20% (at 5 min.) 3.5 Nm
20 s ON 240 s OFF 6 Nm
hex 7 mm
DC Motor 24 V Hall/5 V DC/0.3 A IP30
120 rpm (24 V) 20% (at 5 min.) 3.5 Nm
20 s ON 240 s OFF 6 Nm
hex 6 mm
DC Motor 24 V Hall/5 V DC/0.3 A IP30
120 rpm (24 V) 20% (at 5 min.) 3.5 Nm
20 s ON 240 s OFF 6 Nm
hex 7 mm
Description
Compact 24 V DC motor with worm gear and continuous hexagon socket. Optimized sound characteristics due to elastic coupling and vibration damping fastening elements.
Although the drive was developed for ergonomic table applications, it can be used in many other fields.
The drive is designed and tested for axial pressure load. A cable with AMP plug and an integrated Hall sensor allows easy and secure control of the entire system.
Special features
▪ Vibration and sound-damped design through mechanical decoupling of the spindle system
▪ Two integrated Hall sensors for measurement of the revo- lutions and direction of rotation
▪ Through going hexagon socket in wrench widths 6 mm and 7 mm
▪ Good self-locking properties
▪ 100 mm motor cable with connector included
▪ Can be combined with most Ketterer spindle systems
Variant key
The variants are formed by the different wrench widths and by fastening variants with and without fastening plate (Variant A or Variant B).
Model
3130.00-1002 Variant B
3130.00-1003 Variant B
3130.00-2002 Variant A
3130.00-2003 Variant A
* Load determined for service life of 10,000 double strokes
81
3130.75-02/20190226