Page 28 - Ketterer – Brochure Motor Drives and Spindle Drives

Electric motor drive system for large umbrellas 3062
Electric motor drive system for integration into the telescopic tubing sys- tem, consisting of motor, controller, gear and operating elements.
The drivetrain is designed for high push and pull forces and opens/closes the large umbrella effortlessly at the push of a button. The set also includes a hand crank for emergency operation as well as a single-channel remote control.
The system can be adapted to the pole tube inner diameter (DXX > 53mm), if required by the customer.
Special features
▪ ▪ ▪ ▪ ▪
Voltage
Electric current
Switch-on current (factor)
Motor power consumption
Drive output power
Rated torque / Nominal torque / peak torque Idle running speed
Rated speed
Mode of operation
Ambient temperature / humidity
Operating temperature, motor Protection class
Transmission ratio i
drivetrain electric drive - spindle
External diameter D
Speed of travel under nominal load
Max load peaks tensile-/compressive forces static
Electric motor spindle drive, completely integrable in the pole tube Transmission ratio of drivetrain, electric drive – spindle i = 1:1 Transmission ratio of drivetrain, crank – spindle i = 1:4 Maintenance-free
Flexibly adaptable to the customer needs: Outer contour (min. 53 mm / max. 73 mm)
3062.00-V01DXX
230 V~/50 Hz
1.0 A
x 1.2
220 W
approx. 60 W
5 Nm / 7 Nm short time 134 RPM
120 RPM @ 5 Nm
S2 4 min
Overheating protection with switch-off at approx. 110 °C IP 44
XX mm (Preferred variant 53 mm) 8 mm/s*
10,000 N
Operation: T = -10 °C to +60 °C / H max. 90% Storage: T = -15 °C to +70 °C / dry, non-condensing
1:1
* in combination with spindle 25x4
218
3062.75-02/20210721