Page 11 - Ketterer – Brochure Lifting Units
P. 11
square22
Retracted length E customized
17.5
2.5
View X (Rotation stop)
9
X
Stroke H 45 customized
37
ø 3.65 (4x)
for screw DIN 7500
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable.
▪ Installation note: Use at least 2 opposite fixing
holes ø 3.65 for DIN 7500 screws.
View Y
35
R 4.5
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives.
You will find them at:
https:// www.ketterer.de/en/downloads/ instructions
www.ketterer.de
13 11
Y
27
hex 6
35
16.5
M6/ 17 deep
Lifting Units
