Page 21 - Ketterer – Brochure Motor Drives and Spindle Drives

X
ø59
Pin assignment
View A
123
654
Technical notes
Y
A
View Y
X
View X
33.7 43.2
96
M5 (4x)
PIN assignment:
1. Motor black - 2. Motor blue +
PIN type AMP170364
Pressure load
FG
Installation position/Mounting
3. Hall sensor red +5V
4. Hall sensor violet, output 2 5. Hall sensor black -
6. Hall sensor green, output 1
PIN type AMP170363
Adaptor plate customer specific, not included
▪ Spindle not included; must be ordered sepa- ▪
rately. the holding torque position of the drive can be
▪ Attention: The drive is only suitable for axial
pressure load. Note correct installation position ▪ (see installation example).
▪ The drive must be protected against lateral forces by a guide system.
▪ The drive working range (nominal torque) is determined for a service life of 10,000 double strokes.
increased.
The controller* regulates the system in such a way that the travel speed in the entire drive working range is kept as constant as possible.
* In combination with LogicData control box Compact-3
By using a controller with a short-circuit brake
www.ketterer.de
21
49.6
Cable length 260 +10 mm incl. connector
39.7 50
a 59.7
96.8 155.5
Gear Motors
Y
Y
X