Page 5 - Ketterer – Brochure Lifting Units

12
29.5
Stroke H
customized 17.5
Output spindle square22 YX
Input
hex 6
Mounting adapter
4 mounting holes M5/ 5 deep
Retracted length E to customer specification
View Y
30
24
11
2.5
View X (Rotation stop)
9
44
Number of bevel gears for deflection of movement and the drive position are customer specific
Technical notes
R 4.5
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch
> 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable.
▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head
of 3 Nm!
▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instruc- tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Application example
Table top
Input hex 6 mm Mounting adapter
Suppport tube Spindle
www.ketterer.de
75
30
16.5
M6/ 17 deep
16
Lifting Units