Page 7 - Ketterer Drives – Brochure BLDC Technology

t-Rex 3200 I-44-89 L41 S2 DH
Rated voltage Rated current
Rated torque
Rated speed
Shaft power (output) Max. efficiency
Idle speed
No-load current
Stall torque
Starting current at idle speed Torque constant
Speed constant
Motor parameters
Terminal resistance (phase to phase) Terminal inductance (phase to phase) Rotor inertia
Number of poles
Interconnection of the motor Number of coils per phase Interconnection of coils Direction of rotation
Note: Max. ambient temperature = 40 °C, controller-specific At the nominal point (TU = 20°C), controller-specific
Motor characteristics at 24 V
S1 Mode
24 VDC 1.7A
0.5 Nm 600 rpm 31 W 83 %
812 rpm
0.3 A 1.8 Nm 6.6 A 0.279 Nm/A 34 rpm/V
3200.00-0005 / 3200.00-0006
36 VDC 1.8 A
0.5 Nm 960 rpm 50 W 83 %
1221 rpm
0.2 A 2.3 Nm 8.7 A 0.264 Nm/A 34 rpm/V
2.6 Ohm
1.6 mH
26.5 kg* mm2
14
Star
2
2 Series
bidirectional
48 VDC 1.7 A
0.5 Nm 1347 rpm 70 W 83 %
1653 rpm
0.2 A 2.9 Nm 11.2 A 0.261 Nm/A 34 rpm/V
Motor cable approx.1.5 m
Item number: 3200.53-05
Motor phases
97531
10 8 6 4 2
1= U-Phase 2= n.c.
3= U-Phase 4= U-Phase 5= V-Phase 6= V-Phase 7= W-Phase 8= V-Phase 9= W-Phase
10= W-Phase
n.c.= please do not connect RM 2.54 / 10 PIN
W+P 3491-10
Hall-sensors
2468
1357
1= H3- 2= H1- 3= 5 V 4= H3+ 5= H1+ 6= GND 7= H2+ 8= H2-
Torque (Nm)
Socket strip RM 2.54 / 8 PIN W+P 3491-08
Digital Hall-sensors
Supply of sensors: Voltage range: 4.5 to 5.5 V DC / Optional: voltage regulator for 5 V, Input current: < 70 mA Output signals of sensors: Differential output, (RS422 standard, datasheet AM26 C31-TI)
Typical voltage range: 0.2/ 3.4 V @ 20 mA / Output current: max. 20 mA
Signal structure: The Hall sensors have a 120° phase shift to each other. Due to the 14-pole design the Signal frequency is seven times higher than the speed
www.ketterer.de
27
Degree of efficiency (%)
Rotational speed (rpm)
Shaft power (W)
Recording current (A)
BLDC-Motors